KYMCO Mongoose 70 User Manual

8. CYLINDER/PISTON
8-15
CYLINDER/PISTON INSPECTION
Check the cylinder and piston for wear or
damage.
Clean carbon deposits from the exhaust port
area.
Measure the cylinder bore at three levels of
A, B and C in both X and Y directions.
Avoid the port area. Take the maximum
figure measured to determine the cylinder
bore.
Service Limit: 39.05 mm (1.562 in)
Inspect the top of the cylinder for warpage.
Service Limit: 0.1 mm (0.004 in)
Middle
Botto
m
Top
Be careful not to damage the cylinde
r
inside wall.
＊

KYMCO Mongoose 70 Specifications

General

Brand	KYMCO
Model	Mongoose 70
Category	Offroad Vehicle
Language	English