14. BATTERY/CHARGING SYSTEM/
A.C. GENERATOR
14-9
Remove the cooling fan by removing the
four cooling fan attaching bolts.
Hold the flywheel with an universal holder.
Remove the flywheel nut.
Special tool
Universal Holder A120E00017
Remove the A.C. generator flywheel using
the flywheel puller.
Special tool
Flywheel Puller A120E00001
Remove the pulser coil bolts.
Remove the A.C. generator wire rubber
sleeve and pulser coil from the right
crankcase.
Remove the two bolts and A.C. generator
stator.
Cooling Fan
Universal Holde