Be sure no foreign material enters the
crankcase.
CAUTION:
2-2. Engine oil replacement
A. Place the machine on a level place.
B. Warm up the engine for several minutes
and stop it.
C. Place a container under the engine.
D. Remove the oil filler cap (1) and drain plug
(2) to drain the oil.
(1) Dipstick/oil filler cap
133
(1)
(2) Drain plug
(2)
E. Reinstall the drain plug and tighten the
drain plug to specification.
F. Fill the engine with oil and install the oil
filler cap.
G. Warm up the engine for several minutes at
idle speed. Check for oil leakage while
warming up.
To Next Page
Loading...
