CABLE INSPECTION AND LUBRICATION
POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the outer
covering of control cables becomes
damaged.
Cables can also become frayed or kinked.
Operation of controls could be restricted,
which could cause an accident or injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace
damaged cables.
Lubricate the inner cables and the cable ends. If
the cables do not operate smoothly, ask a
KYMCO dealer to replace them.
Recommended lubricant:
KYMCO chain and cable lube or
SAE 10W40 motor oil
WARNING
BRAKE LEVER LUBRICATION
Lubricate the pivoting parts of the brake levers.
Recommended lubricant:
Lithium-soap-based grease
(All-purpose grease)
167
To Next Page
Loading...
