7. Fill the engine with oil and install the oil
filler bolt.
Recommended oil: SEA #90.
Oil quantity :
Periodic oil change
0.5L(0.43lmpqt,0.53USqt)
0.3L(0.27lmpqt,0.31USqt)
0.2L(0.18lmpqt,0.21USqt)
MXU 300:
MXU 250:
MXU 150:
Be sure no foreign material enters the
crankcase.
CAUTION:
Tightening torque
Oil filler bolt: 20 Nm (2 m-kg, 15 ft-lb)
8. Start the engine and warm up for a few
minutes. While warming up, check for oil
leakage. If oil leakage is found, stop the
engine immediately and check for the cause.
137
To Next Page
Loading...
