(2) Coolant temperature gauge (MXU 300/250)
The coolant temperature gauge shows
coolant temperature.
The normal operating temperature range is
within the section between the segment C
and segment H.
Overheating message
When the coolant is over specified temperature,
the coolant temperature gauge flashing.
If this occurs, stop the engine and check the
reserve tank coolant level. Read and
to not ride the ATV until the problem has been
corrected.
page 161
27
(1)
(2)
(1) Segment C
(2) Segment H
1. The engine may overheat if the ATV is
overloaded. If this happens, reduce the
load to specification.
2. Restart after making sure that the
indicator is out. Continuous use while
the indicator is flashing may cause
damage to the engine.
CAUTION:
To Next Page
Loading...
