KYMCO People GT 300i Service Manual

14. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
14-4
People GT 300i
STEERING HANDLEBAR
REMOVAL
Remove the handlebar front and rear covers.
(
Ö
2-3)
Remove the front and rear brake master
cylinder attaching bolts.
Remove the four screws attaching the right
and left handlebar switches.
Disconnect the throttle cable from the throttle
grip and remove the throttle grip from the
handlebar.
Remove the handlebar lock nut, then take out
the bolt and collar.
Remove the handlebar.
INSTALLATION
Install the handlebar onto the steering stem
and install the handlebar collar, lock nut and
bolt.
Tighten the handle post bolt to the specified
torque.
Torque: 45 N-m
Screws
Lock Nut
Brake Master Cylinders
Bolts
Throttle Grip
Throttle Cable
Colla
r
Bolt

KYMCO People GT 300i Specifications

General

Brand	KYMCO
Model	People GT 300i
Category	Scooter
Language	English