18. STARTING SYSTEM
18-3
People GT 300i
STARTER MOTOR
REMOVAL
Remove the seat, met-in box and carrier.
Remove the body cover, center cover and
rear fender together.
Remove the nut goes to the starter relay and
relax cable band to disconnect the starter
motor cable.
Remove two start motor mounting bolts and
the motor.
Before removing the starter motor, turn
the ignition switch OFF and remove the
battery ground. Then, turn on the ignition
switch and push the starter button to
make sure the starter motor can’t
operate securely.
＊
Nut
Starter Motor Cable
Bolts
To Next Page
Loading...
Need help?
General