Name: KYMCO PEOPLE S 200
Brand: KYMCO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

5. FUEL SYSTEM

5-4

PEOPLE S 4T

CARBURETOR REMOVAL

Remove the frame body cover. (

Disconnect the auto bystarter wire connector.

Loosen the drain screw and drain the fuel

from the float chamber.

Disconnect the fuel tube and vacuum tube at

the carburetor.

Loosen the throttle cable adjusting nut and

lock nut, and disconnect the throttle cable

from the carburetor.

Loosen the carburetor intake manifold band

and air cleaner connecting tube band screws

and then remove the carburetor.

AUTO BYSTARTER

OPERATION INSPECTION

Measure the resistance between the auto

bystarter wire terminals.

Resistance: (50cc) 5Ω,(125/200cc) 15Ω max.

(10 minutes minimum after stopping the

engine)

If the reading is not within the limit, replace

the auto bystarter with a new one.

uto Bystarter Wire

djusting Nut

Fuel Tube

Intake Manifold Band

ir Cleaner Connecting

Tube Band

Vacuum Tube

Lock Nut

Other manuals for KYMCO PEOPLE S 200

Questions and Answers:

Need help?

Do you have a question about the KYMCO PEOPLE S 200 and is the answer not in the manual?

General