39
11.1 Charging the batteries
11.1.1 Cha
ging the batteries
via the tiller
witchingoff
Eng
ging
Switch off.
Engage the engaging lever for push
mode into the “drive“ position.
It is imperati
e that
ou obse
ethe
sequence for connecting and
disconnecting the battery charger.
Connecting the batte
charger
The jack socket (3) for connecting the
battery charger is located on the tiller.
(1.) Connect the battery charger plug (4)
to the charging socket.
(2.) Connect the battery charger mains
plug (5) to a mains socket and
switch on.
N
E:
The battery charger switches
on automatically when
connected to the mains.
Charging the batteries
OFF