KYMCO SUPER 8 - Setting up the scooter; 6.1 Adjusting the seat height

A
djusting the seat height
6.0
Setting
up the scooter
The following passage describes how to set up your scooter in order to
ensure that you have a comfortable and safe drive.
6.1
Adjusting the seat height
NOTE!
The seat must be removed from the
scooter in order to adjust th
e
seat height. You should try to get help from a second person if
possible or contact your dealer.
Removing
t
he sea
t
Removing the seat:
Tilt the backrest forwards.
Lift the seat while pulling the seat
lock (a) out of the seat support (1).
19
Adjusting the seat height:
Remo
v
ing the clamping
bolt and hold bolt
Remove the clamping bolt (1)
and hold bolt.(2)
Out of the seat support (3).
1xRing spanner, size 12mm
1x Hexagon bolt.
(a)
{
|
(1)
}