49
Cleaning
14.0
Cleaning
NOTE
• Only use mild detergents without scouring agents to clean any
surfaces.
• Please observe instructions for use on the detergents to avoid
damage to the component surfaces.
• Do not use any sharp-edged tools such as knives, metal
scrapers or aggressive solvents for cleaning.
• Do not use high-pressure cleaners to clean the scooters.
• Never direct water spray onto the fittings on the tiller or drive unit
components.
Light soiling or dust is best removed using soft cloths.
Heavy soiling can best be removed with damp cloths and
slightly soapy water.
Use a dry cloth to dry the scooter off after cleaning!
All lacquered surfaces can be cleaned and preserved using car
polish.
To Next Page
Loading...
