3. INSPECTION/ADJUSTMENT
3-10
SUPER8 50
REAR
Check the action of the rear shock absorber
by compressing it several times.
Check the entire shock absorber assembly for
oil leaks, looseness or damage.
Jack the rear wheel off the ground and move
the rear wheel sideways with force to see if
the engine hanger bushings are worn.
NUTS/BOLTS/FASTENERS
Check all important chassis nuts and bolts for
looseness.
Tighten them to their specified torque values
if any looseness is found. (
Ö
1-11)
WHEELS/TIRES
Check the tires for cuts, imbedded nails or
other damages.
Check the tire pressure.
TIRE PRESSURE
1 Rider 2 Riders
Front 1.5kg/cm
2
1.75kg/cm
2
Rear 2.00kg/cm
2
2.25kg/cm
2
TIRE SIZE
Front: 120/70
-
12
Rear : 130
/
70
-
12
Check the front axle nut for looseness.
Check the rear axle nut for looseness.
If the axle nuts are loose, tighten them to the
specified torques.
Torques: Front : 5.0～7.0kgf-m
Rear : 11～13kgf-m
Tire pressure should be checked when
tires are cold.
＊
Front Axle Nu
To Next Page
