KYMCO SUPER8 50 - Camshaft Installation

7. CYLINDER HEAD/VALVES
7-9
SUPER8 50
Install the cylinder head.
CAMSHAFT HOLDER ASSEMBLY
First assemble the camshaft holder.
Install the intake and exhaust valve rocker
arms and rocker arm shafts.
CAMSHAFT INSTALLATION
Turn the flywheel so that the “T” mark on the
flywheel aligns with the index mark on the
crankcase.
Keep the round hole on the camshaft gear
facing up and align the punch marks on the
camshaft gear with the cylinder head surface
(Position the intake and exhaust cam lobes
down.) and install the camshaft onto the
cylinder head.
Install the cam chain over the camshaft gear.
Install the dowel pins.
Dowel Pins
Valve Rocker Ar
m
Punch Marks
C
y
linder Head
Camshaft Holde
r
Cam Chain
Round Hole
Camshaft Gea
r
• When installing the rocker arm shaft,
align the shaft front end with the bolt
hole of the camshaft holder.
＊