KYMCO SUPER8 50 - Engine Removal Steps

6. ENGINE REMOVAL/INSTALLATION
6-2
SUPER8 50
ENGINE REMOVAL
Disconnect the battery negative cable.
Remove the frame body cover. (
Ö
2-3)
Disconnect the spark plug high tension wire.
Disconnect the auto bystarter wire connector.
Disconnect the A.C. generator wire
connector.
Disconnect the starter motor cable and earth
cable from the starter motor.
Remove the fuel tube.
Remove the spark plug cap.
Disconnect the vacuum tube.
Loosen the throttle cable adjusting nut and
lock nut, and disconnect the throttle cable
from the carburetor.
A．C．G Wire Connecto
r
Vacuum Tube
Spark Plug High Tension Wire
Band
S
tarter Motor
C
a
bl
e
Eart
h
r
C
a
bl
e
Lock Nut
Adjusting Nut
fuel tube