EasyManuals Logo

KYMCO X-Town 300 User Manual

KYMCO X-Town 300
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Spark plug
MAINTENANCE
Remove the carbon deposits from the spark plug
with a nonmetal brush and the suitable solvent.
After cleaning, check to adjust the spark plug gap
to specified limit by using a spark plug gap
thickness gauge. The spark plug should be
replaced periodically.
Recommend to consult with the KYMCO dealer
when choosing an alternative spark plug instead.
Recommended spark plug300DPR6EA-9
CAUTION
An improper spark plug may have an incorrect fit
or heat range for your engine. This may cause
severe engine damage which will not be covered
under warranty. Never use a spark plug with an
improper heat range, as it could result in severe
engine damage.
Spark plug gap:
X-Town300
0.8~0.9 mm
0.8~0.9

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO X-Town 300 and is the answer not in the manual?

KYMCO X-Town 300 Specifications

General IconGeneral
Cooling SystemLiquid cooled
Maximum Torque22.5 Nm @ 6500 rpm
TransmissionCVT
Front SuspensionTelescopic fork
Rear SuspensionDual shocks
Front BrakeDisc
Rear BrakeDisc
Front Tire120/70-15
Seat Height800 mm
Width800 mm
Fuel Capacity12.5 Liters
Engine Type4-stroke, single cylinder
Fuel SystemElectronic Fuel Injection

Related product manuals