Kyocera DF-9100 - Page 199

3-121
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
31
Bend both sides [B] of the food cover front [A] slightly and get 2 projections [C] out
from holes [D] by pushing down the cover [A] (Screw x2). The screw will use in step
38. Remove foot cover [A].
32
Pull the foot cover rear [A] and get 2 projections [B] out from holes [C] (Screw x3).
The screw will use in step 37. Remove foot cover rear [A].
[B]
[B]
[A]
[B]
[D]
[B]
[C]
[A]
[A]
[A]
[A]
[C]
[B]