3-225
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
(5-2) Others (5-2) Status Indicator Light (SL-9100)
This is a procedure of setting up Status Indicator with pole and bracket.
1
Adjust sound volume.
1 Separate SL-9100 by rotating it.
2 Switch from [H] to [L].
3 Reassemble.
2
Insert pole ring [A] to bracket [B].
• All tapes and packing materials on the accessories parts have to be removed.
• Main power switch has to be turned off and power cable has to be unplugged before install SL-9100.
Default setting is high volume, H (80dB).
In case if not to change the volume to low, L (70dB), then start from step2.
The sound can be OFF in System menu on operation panel.
[B]
To Next Page
Loading...
