2-4
The main unit setup procedure >
[CONFIDENTIAL]
[Set up time as reference]: Except enhancement set up
The time showed below includes the ink installation time of 60 min.
Quality priority mode: within 160 min
Print priority mode: within 100 min
List of jig, tool and consumable material for set up and scheduled maintenance.
Bolt head size of height adjustment for each units
In case of moving the main unit, make sure that the waste ink and the cleaning liquid tank are removed and no
ink in the waste ink tray of the treatment unit. (see page 6-1
)
And do not make the main unit vibrate and not hold up one side more than 80 mm in order to avoid from ink
leaking.
Group Parts Remark
Jig/Tool Stubby driver Remove protecting caps for shipping (Total length 95mm or less)
Jig/Tool Wrench (M10: 17 mm/M12: 19 mm) Height/Level adjustment
Jig/Tool Dishpan Used to contain water during cleaning of ink from parts
Jig/Tool Hex socket driver (5 mm) Color skew adjustment
Jig/Tool Jig for removing wipe unit Holder for the wipe unit (302TJ4154*) and Tray (302TJ4155*)
Jig/Tool Slope For taking main unit or enhancement down from palette.
(302TJ94E5* PARTS SLOPE SET UP SP)
Consumable Alfa wipe TX-1000 Series Clean ink around ink tube coupler
Consumable Kim towel white or BEMCOT or
Wypall 60X/70X
At setting cleaning liquid tank (in case of getting wet)
Consumable Designated deionized water Deionized water PR#9435A, R-950-32 or the water certify by Kyocera
Clean image conveying belt
Other stuffs Rubber gloves (powder free) For handling cleaning liquid tank
Consumable
stuffs
Trash bag For discard trash
Consumable Plastic sheeting Protect floor from ink
Consumable Paper (Standard) For image quality check ((LTR/A4/A3/LGR/13x19.2”)
Consumable Paraffin film Prevent ink leaking from coupling part
Parafilm Moisture Proof Sealing Film
Consumable 7BG050022H GREASE FLOIL G-
301KB 50G
For gear of CISREG: For plastic blue 50g (Blue color fade to yellow)
Consumable 7BG050023H GREASE FLOIL
KDG-67 50G
For gear for lifting motor in treatment unit: For metal yellow 50g
Consumable 60170001 SCANNER RAIL
GREASE(PG671)
For noise from ISU or scanning failure
Unit name Bolt head size
AK-9110 / AK-9120 / DE-9100 / DF-9100 17 (M10)
Main unit / ST-9100 / PF-9100 19 (M12)
To Next Page
Loading...
