Kyocera DF-9100 - Page 372

6-42
Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
[CONFIDENTIAL]
34
Open the cleaning liquid tank cover [B] by rotating the lock lever [A] in the direction
of the arrow.
35
Insert the cleaning liquid tank [A] in the direction of the arrow until it stops.
36
Remove the cap [A] and reattach the spacer [B].
37
Close the cap [A] again.
IMPORTANT
Do not tighten the cap but just put on.
[A]
[B]
[A]
[A] [A][B]