Kyocera ECOSYS FS-C8520MFP User Guide

Settings Pages
Specifies whether or not to enable the IPv6 protocol. Select On to use the
IPv6 protocol.
• IP Address (IPv6)
Assigns an IPv6 address to the printing system network component. The
format of the IPv6 address is a sequence of numbers (128 bit in total)
separated by colons, for example, 2001:db8:3c4d:15::1a2c:1a1f.
• Prefix Length
Specifies the IPv6 prefix length of the hosts or network with which the print
system is connecting.
• RA (Stateless)
Select On to use RA to configure IPv6 addresses.
• Default Gateway
Specifies the IPv6 address of the default gateway.
• DHCPv6
Specifies whether or not to obtain IPv6 IP addresses by automatic
configuration. When RA is turned On, the IP addresses and server
information are obtained via DHCPv6 based on the settings of the automatic
configuration made under RA (router setting).
Basic > Defaults > Time
If a time server is used to synchronize the time as well, the current time can be
adjusted regularly and easily. Enter the host name or IP address of the time
server and click the Synchronize button.
Time information is required when you receive reports from this machine via E-
mail. It is recommended that you set the time when the report mail function is
enabled.
Current Local Time
Displays the time that is currently set in the machine.
Current Universal Time (UTC/GMT)
Displays the Greenwich Mean Time that is currently set in the machine.
Time Zone
Sets a time difference. Click the drop down list and select your region.
Summer Time
Switches the Summer Time setting On and Off. Select On in order to have
the Summer Time function applied when the time is synchronized with a time
server.
Time Server
Enter the host name or IP address of the time server from which you want to
acquire the time.
Synchronize with Time Server now
Click the Synchronize button to synchronize the registered time with the
designated timer server.
Synchronization Status
Displays the results of the synchronization operation with the time server.
COMMAND CENTER RX 6-5

Kyocera ECOSYS FS-C8520MFP Specifications

General

Category	Printer
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (B/W)	20 ppm
Print Speed (Color)	20 ppm
Max Print Speed (B/W)	20 ppm
Max Print Speed (Color)	20 ppm
Print Resolution	600 x 600 dpi
Max Print Resolution	9600 x 600 dpi
Max Paper Size	A3
Duplex Printing	Yes
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Duplex Scanning	Yes
Copy Resolution	600 x 600 dpi
Fax	Yes
Supported Paper Sizes	A3, A4, A5, A6, B5, Letter, Legal
Monthly Duty Cycle	65000 pages
Max Paper Capacity	1600 sheets
Memory	1 GB
Connectivity	USB, Ethernet
Copier Speed (B/W)	20 ppm
Copier Speed (Color)	20 ppm
Copy Speed (B/W)	20 ppm
Copy Speed (Color)	20 ppm
Display	4.3-inch touch screen