8-32
Setup and Registration (System Menu) > System Menu
EnergySaver Set.
[System Menu/Counter] key > [▲] [▼] key > [Common Settings] > [OK] key > [▲] [▼] key > [EnergySaver Set.] > 
[OK] key
Copy
[System Menu/Counter] key > [▲] [▼] key > [Copy] > [OK] key 
Configures settings for copying functions.
Item Description
Recovery Level Select the method of recovery from energy saver.
Value:
Full Recovery: This mode enables the use of all functions immediately. 
However, this mode saves less energy.
Normal Recovery: In this mode, you can select the method from the following: 
enabling the use of all functions immediately or enabling the 
use of desired functions only.
If you want to use all functions immediately, press the power 
switch to execute recovery.
Power Saving Recovery: This mode enables the use of desired functions only. This 
mode saves energy most effectively.
Item Description
Paper Selection Set the default paper selection.
Value: Auto, Def. PaperSource
AutoPaperSelect. If [Auto] is selected for Paper Selection, set the paper size selection method when the zoom 
changes.
Value
MostSuitableSize: Select paper based on the current zoom and the size of the original.
Same as OrigSize: Select paper that matches the size of the original, regardless the 
zoom.
Auto % Priority When a paper source of different size from the original is selected, select whether automatic 
zoom (reduce/zoom) is performed.
Value: Off, On
DP Read Action When the document processor is used, select the scanning operation for the document 
processor.
Value
Speed Priority: Gives priority to scanning speed.
Quality Priority: Gives priority to image quality at a slightly slower scan speed.
Select Key Set. Commonly used copying functions can be registered to the Select key. Functions can be easily 
configured by selecting the Select key.
Value: None, Paper Selection, Collate, Duplex, Zoom, Combine, Original Size, 
Orig. Orientation, Mixed Size Orig., Original Image, Density, EcoPrint, Continuous Scan, 
File Name Entry, JobFinish Notice, Print Override, Sharpness, Contrast, 
Backgrnd Density, Skip Blank Page