Kyocera ecosys M2640idw

6-22
Using Various Functions > Functions
Skip Blank Page
When there are blank pages in a scanned document, this function skips the blank pages and prints only pages that are
not blank.
When set to [High], the level at which blank paper is recognized is higher.
The machine detects blank pages, saving unnecessary printing without the need to check for blank pages in the
document.
Select [Low], [Middle] or [High] in [On].
Continuous Scan
Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [Finish Scan].
(Value: [Off] / [On])
NOTE
The originals with punched holes or originals printed on a colored substrate may not be recognized as blank pages.
Copy
Send
Scan to
USB
Copy
Send
Scan to
USB
1~10
1
1~30
1
11~20
11
21~30
21