Kyocera ECOSYS M3145dn - Using Fax Server to Send a Fax (Fax Server Transmission)

5-27
Operation on the Machine > Sending
Using fax server to send a fax
(fax server transmission)
You can send a scanned document through a fax server.
Configuring Settings before Sending
Before sending a fax, the following setting is required.
• Configure the fax server settings.
FAX Server Settings (page 8-23)
Command Center RX User Guide
Using fax server to send a fax
1
Select the [Send] key.
2
Place the originals.
Place the originals.
3
[▲] [▼] key > [FAX Server] > [OK] key
4
Specifying destination.
Entering the destination fax number with the numeric keys
1 Select [Fax No. Entry].
2 Enter the fax number.
3 Select [OK] key.
Destinations can be changed later.
NOTE
To use this function, you must have a fax server. For information on your fax server, ask your administrator.
Loading Originals (page 5-2)
NOTE
Use the numeric keys to enter a number.
Checking and Editing Destinations (page 5-20)