Kyocera ECOSYS M3145dn - Removing USB Memory

5-43
Operation on the Machine > Removing USB Memory
Removing USB Memory
Follow the steps below to remove the USB memory.
1
Display the screen.
[Reset] key > [Document Box/USB] key > [▲] [▼] key > [USB Memory] > [OK] key
2
Select [Remove Memory].
[Menu] > [▲] [▼] key > [Remove Memory] > [OK]
3
Remove the USB memory.
When "USB memory can be safely removed." is displayed, select [OK] and then remove the
USB memory.
IMPORTANT
Be sure to follow the proper procedure to avoid damaging the data or USB memory.
NOTE
USB memory can also be removed after checking the status of the device.
Device/Communication (page 7-14)