10-14
Troubleshooting > Troubleshooting
Printouts have vertical lines.
Is the slit glass dirty? Clean the slit glass. page 10-2
Dirt on the top edge or back
of the paper.
Is the interior of the machine dirty? Clean the interior of the machine. page 10-3
Part of the image is
periodically faint or shows
white lines.
― Select the [System Menu/Counter] key
> [Adjust/Maint.] > [Service Setting] >
[Drum Refresh] > [Yes]
―
Print on the back of the
sheet is visible on the front.
― Set [Prevent Bleed-through] to [On]. page 6-16
page 8-33
Lines appear on ruled lines. Is the paper damp? Replace the paper with new paper. page 3-2
― Select the [System Menu/Counter] key
> [Adjust / Maint.] > [Service Setting]
> [Transfer Adj.], and set to
[LineTextPriority].
―
Part of the image has come
off (poor toner fixation).
― Select the [System Menu/Counter] key
> [Adjust / Maint.] > [Service Setting]
> [Fuser Adjustment], and set to [2].
―
Symptom Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
