6-7
Using Various Functions > Functions Available on the Machine
Removable Memory (Store File, Printing Documents)
To configure the settings for functions, select the function key. By selecting [Functions], other selectable functions will be
shown as a list.
For details on each function, see the table below.
Store File
Function key Description
Reference
page
File Format Specify the image file format. Image quality level can also be adjusted. page 6-29
Duplex Select the type and orientation of the binding based on the original. page 6-27
Scan Resolution Select fineness of scanning resolution. page 6-32
Density Adjust density. page 6-12
File Name Entry Adds a file name. page 6-25
Color Selection Select the color mode setting. page 6-14
Functions Description
Reference
page
Quiet Mode Lower print and scan speed for quiet processing. page 6-26
Original Size Specify the original size to be scanned. page 6-9
Original Orientation Select the orientation of the original document top edge to scan correct direction. page 6-11
Mixed Size Originals Scans all sheets in the document processor, even if they are of different sizes. page 6-12
Storing Size Select size of image to be stored. page 6-34
Original Image Select original image type for best results. page 6-13
Sharpness Adjusts the sharpness of image outlines. page 6-17
Contrast You can adjust the contrast between light and dark areas of the image. page 6-17
Background Density
Adj.
Removes dark background from originals, such as newspapers. page 6-18
Prevent Bleed-thru Hides background colors and image bleed-through when scanning thin original. page 6-19
Skip Blank Page When there are blank pages in a scanned document, this function skips the blank
pages and prints only pages that are not blank.
page 6-26
Zoom Adjust the zoom to reduce or enlarge the image. page 6-19
Continuous Scan Scans a large number of originals in separate batches and then produce as one job. page 6-24
To Next Page
Loading...
Need help?
General
Weight and Dimensions
