8-39
Setup and Registration (System Menu) > System Menu
Adjustment/Maintenance
[
System Menu/Counter
] key > [
Adjustment/Maintenance
]
Adjust printing quality and conduct machine maintenance.
Item Description
Auto Error Clear
If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value: Off, On
Error Clear Timer
If you select [
On
] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
This function is displayed when [
Auto Error Clear
] is set to [
On
].
Unusable Time
*1
*1 Only on products with the fax function installed.
FAX Operation Guide
.
Ping Timeout
Set the time until timeout occurs when [
Ping
] is executed in "System/Network".
Value: 1 to 30 seconds (in 1 second increments)
Item Description
Quiet Mode Settings
Lower print and scan speed for quiet processing.
Quiet Mode
Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value: Off, On
Specify for Each Job
It is possible to set the use of Quiet Mode for each job, such as copying and sending. Set
whether or not to permit the setting for each job.
Value: Permit, Prohibit
Density Adjustment
Adjust density.
Copy
Adjust copy density.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Send/Box
Adjust scan density when sending or storing the data in Document Box.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Contrast
You can increase or decrease the overall contrast.
Copy
Increases or decreases the overall contrast of copies.
Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Send/Box
Increases or decreases the overall contrast when documents are sent or saved in a document
box.
Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Background Density Adj.
Darkens or lightens overall background density adjustment.
Copy (Auto)
Darkens or lightens overall background density adjustment during copying.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Send/Box (Auto)
Darkens or lightens overall background density when sending images or storing them in the
Document Box.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
