Kyocera ECOSYS M6535cidn User Manual

8-40
Setup and Registration (System Menu) > System Menu
Auto Color Correction This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value: 1 (Color), 2, 3, 4, 5 (B & W)
Correcting Black Line Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value
Off: No correction performed. Select this when you want to reproduce fine lines in the
original more clearly than with [On (Low)].
On (Low): Correction performed.
On (High): Select this item if a streak remains after using [On (Low)]. The reproduction
of fine lines on the original may become lighter than when using On (Low).
Display Brightness Set the brightness of the touch panel.
Value: 1 (Darker), 2, 3, 4, 5 (Lighter)
Color Registration When first installing the machine or moving it to a new location, color drift during printing may
occur. Use this function to correct the color position of each of cyan, magenta and yellow to
resolve color drift.
Color Registration Procedure (page 10-29)
Drum Refresh Remove image blur and white dots from the printout. It takes about 3 minutes. The time
required may vary depending on the operating environment and this process may take time.
Drum Refresh (page 10-34)
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is
done.
Calibration Adjust color drift or hue of printed image in the most appropriate color.
Calibration (page 10-34)
Laser Scanner Cleaning Remove vertical lines from the printout.
Laser Scanner Cleaning (page 10-34)
Service Setting Settings for machine maintenance and inspection. This menu is primarily used by service
technicians to perform maintenance.
Item Description

Kyocera ECOSYS M6535cidn Specifications

General

Secure printing	Yes
Print technology	Laser
Maximum resolution	9600 x 600 DPI
Duplex printing mode	Auto
Print resolution black	600 x 600 DPI
Time to first page (black, normal)	7 s
Time to first page (color, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Copier resize	25 - 400 %
Maximum number of copies	999 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	9 s
Time to first copy (color, normal)	11 s
Scan to	E-mail, FTP, SMB, TWAIN, USB, WIA
Scan drivers	TWAIN, WIA
Scanner type	ADF scanner
Grayscale levels	256
Maximum scan area	Legal (216 x 356) mm
Scan speed (black)	60 ppm
Scan speed (color)	40 ppm
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Faxing	Color faxing
Fax memory	256 pages
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax transmission speed	3 sec/page
Digital sender	-
Maximum duty cycle	100000 pages per month
Page description languages	Epson LQ, IBM ProPrinter XL24E, Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Internal memory	1024 MB
Processor model	465S
Processor family	PowerPC
Compatible memory cards	SD, SDHC
Maximum internal memory	2048 MB
Sound power level (standby)	37.6 dB
Sound pressure level (copying)	49.7 dB
Sound pressure level (quiet mode)	46.5 dB
Paper input type	Cassette, Paper tray
Total input capacity	350 sheets
Total output capacity	250 sheets
Maximum input capacity	1850 sheets
Total number of input trays	2
Maximum number of input trays	4
Multi-Purpose tray input capacity	75 sheets
Auto document feeder (ADF) input capacity	100 sheets
Custom media width	70 - 216 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Paper tray media types	Plain paper
Paper tray media weight	60 - 163 g/m²
Non-ISO print media sizes	Folio
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Auto Document Feeder (ADF) media weight	60 - 120 g/m²
Control type	Touch
Product color	Black, White
Display diagonal	7 \
Market positioning	Business
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	3
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.1 W
Power consumption (standby)	73 W
Power consumption (PowerSave)	2.1 W
Power consumption (average operating)	537 W
Mac operating systems supported	Mac OS X 10.5 Leopard
Other operating systems supported	Android, iOS
Sustainability certificates	ENERGY STAR
Certification	TUV/GS, CE

Weight and Dimensions

Depth	558 mm
Width	475 mm
Height	616 mm