8-28
Setup and Registration (System Menu) > System Menu
Item Description
Protocol Detail
―
NetBEUI
Selects whether or not to receive documents using NetBEUI.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
LPD
Select whether or not to receive documents using LPD.
*1
Value: Off, On
SMTP (E-mail TX)
Select whether or not to send e-mail using SMTP.
Value: Off, On
POP3 (E-mail RX)
Select whether or not to receive e-mail using POP3.
Value: Off, On
FTP Client
(Transmission)
Select whether or not to send documents using FTP. When selecting [
On
], set the FTP Port
Number. Use the FTP default port 21.
Value: Off, On (Port Number: 1-65535)
FTP Server (Reception)
Select whether or not to receive documents using FTP.
*1
Value: Off, On
SMB Client
(Transmission)
Select whether or not to send documents using SMB. When selecting [
On
], set the SMB default
Port Number. Use the SMB default port 445.
Value: Off, On (Port Number: 1-65535)
LDAP
Select whether or not to use LDAP.
Value: Off, On
SNMP
Select whether or not to communicate using SNMP.
*1
Value: Off, On
SNMPv3
Select whether or not to communicate using SNMPv3.
*1
Value: Off, On
HTTP
Select whether or not to communicate using HTTP.
*1
Value: Off, On
HTTPS
Select whether or not to communicate using HTTPS.
*1
*2
Value: Off, On
*2 Set "SSL" to [
On
] in "Secure Protocol".
Secure Protocol (page 8-30)
IPP
Select whether or not to receive documents using IPP. When selecting [
On
], set the IPP default
Port Number. Use the IPP default port 631.
*1
*2
Value: Off, On (Port Number: 1-32767)
IPP over SSL
Select whether or not to use IPP over SSL. When selecting [
On
], set the IPP over SSL default
Port Number. Use the IPP over SSL default port 443.
*1
*2
Value: Off, On (Port Number: 1-32767)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
