10-18
Troubleshooting > Troubleshooting
C
Message Checkpoints Corrective Actions
Reference
Page
Calibrating…
— The machine is under the
adjustment to maintain its quality.
Please wait.
page 10-34
Cannot connect to
Authentication Server.
*1
*1 When Auto Error Clear is set to [
On
], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-39)
— Set machine time to match the
server's time.
page 2-24
— Check the domain name. page 9-2
— Check the host name. page 9-2
— Check the connection status with
the server.
—
Cannot duplex print on
the following paper.
*1
Did you select a paper size/type
that cannot be duplex printed?
Select [
Paper Selection
] to select
the available paper. Select
[
Continue
] to print without using
Duplex function.
page 6-23
Cannot print the
specified number of
copies.
*1
— Only one copy is available. Select
[
Continue
] to continue printing.
Select [
Cancel
] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
• Uncheck [
RAM Disk
] in the
[
Device Settings
] tab of the
printer's properties.
If you unchecked the [
RAM Disk
],
check the [
RAM Disk
] again after
the printing is completed. If not,
print speed may be reduced.
—
Cannot process this
job.
*1
― This job is canceled because it is
restricted by User Authorization or
Job Accounting. Select [
End
].
―
Cassette is not installed.
― Cannot feed paper. Set the cassette
indicated on the screen.
―
Check the toner
container.
— The toner container is not installed
correctly. Set it correctly.
page 10-4
Check waste toner box.
— The waste toner box is not installed
correctly. Set it correctly.
page 10-8
Is the waste toner box full? Replace the waste toner box.
Cleaning the laser
scanner…
— The machine is under the
adjustment to maintain its quality.
Please wait.
―
To Next Page
Loading...
Need help?
General
Weight and Dimensions
