No. Description Supplement
(25) Coverage on the last output
page
-
(26) Last job output date -
(27) FRPO setting -
(28) RP Code Code the engine software version and the date of
update.
(29) Code the main software version and the date of
update.
(30) Code the engine software version and the date of the
previous update.
(31) Code the main software version and the date of the
previous update.
(32) High altitude adjustment set
data
Normal/1001-2000m/2001-3000m/3001-3500m
(33) NV RAM version _ 1F3 1225 _ 1F3 1225
(a) (b) (c) (d) (e) (f)
(a) Consistency of the present software version and
the database
_ (underscore): OK
* (Asterisk): NG
(b) Database version
(c) The oldest time stamp of database version
(d) Consistency of the present software version and
the ME firmware version
_ (underscore): OK
* (Asterisk): NG
(e) ME firmware version
(f) The oldest time stamp of the ME database version
Normal if (a) and (d) are underscored, and (b) and (e)
are identical with (c) and (f).
(34) Mac address -
(35) Destination information -
(36) Area information -
(37) Margin settings Top margin/Left margin
(38) Top offset for each paper source MP tray/Paper feeder 1/Paper feeder 2/
Paper feeder 3/Paper feeder 4/Duplex/Page rotation
(39) Left offset for each paper source MP tray/Paper feeder 1/Paper feeder 2/
Paper feeder 3/Paper feeder 4/Duplex/Page rotation
(40) L value settings Top margin integer part / Top margin decimal part/
Left margin integer part / Left margin decimal part/