10-20
Troubleshooting > Troubleshooting
M
N
Message Checkpoints Corrective Actions
Reference
Page
Machine failure.
Call service.
― An error has occurred in the
machine. Make a note of the error
code displayed on the message
display, and contact your service
representative.
—
Memory is full.
Print job cannot be
processed completely.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-32)
― Unable to continue the job as the
memory is used up. Press
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Press
[Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•Select [On] of RAM Disk Setting in
System Menu, and then decrease
the RAM disk size.
• Select [Printer Priority] of
Optional Memory in System Menu.
Before changing the RAM Disk
Setting or Optional Memory setting,
contact your administrator.
page 11-3
Message Checkpoints Corrective Actions
Reference
Page
No multi copies.
Press [OK].
― Only one copy is available. Press
[OK] to continue printing.
―
Non-genuine Toner.
Press [Help].
Is the installed toner container our
own brand?
The manufacturer assumes no
responsibility for damage caused by
a non-genuine toner. When you
want to use the toner container
currently installed, select the [OK]
key and the [Cancel] key
simultaneously for 3 seconds or
more.
―
To Next Page
Loading...
