Kyocera ECOSYS P3155dn

11-7
Appendix > Optional Equipment
Optional Function
The applications listed below are installed on this machine.
Starting Application Use
Use the procedure below to start using an application.
1 [Menu] > [▲] [▼] key > [Op Functions] > [OK] key
2 Select the desired application, and select the [OK] key.
3 [▲] [▼] key > [License On] > [OK] key
4 [▲] [▼] key > [Official] > [OK] key
To use the application as a trial, select [Trial] without entering the license key.
5 Enter the license key > [OK] key
Some applications do not require you to enter a license key. If the license key entry screen does not
appear, go to Step 6.
6 Select [Yes].
Application
Data Encryption (Data Encryption/Overwrite)
UG-33 (ThinPrint Option)
*1
*1 This can be used on a trial basis for a limited time.
ID Card (Card Authentication Kit)
*1
NOTE
• Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: ECOSYS P3145dn: 4500 ECOSYS P3150dn: 5000
ECOSYS P3155dn: 5500
Login Password: ECOSYS P3145dn: 4500 ECOSYS P3150dn: 5000
ECOSYS P3155dn: 5500
NOTE
You can view detailed information on the selected application by selecting [Detail].
NOTE
If you started the Data Encryption/Overwrite or Thin Print option, turn the power OFF/
ON.