8-2
Setup and Registration (System Menu) > System Menu
System Menu
Configure settings related to overall machine operation.
Select the [Me
nu] key to show the settings on the message display. Then, select from the settings displayed.
Refer to
Menu Settings on the following page and configure as needed.
Operation Method (page 2-11)
• In order to change settings that require administer privileges, you must log in with administrator privileges.
The factory default login user name and login password are set as shown below.
ECOSYS P6235cdn ECOSYS P7240cdn
Login User Name: 3500 4000
Login Password: 3500 4000
• If function default settings have been changed, the [Rese
t] key can be selected in each function screen to
immediately change the settings.
To Next Page
Loading...
