Kyocera ECOSYS P6235cdn - Page 161

8-19
Setup and Registration (System Menu) > System Menu
HTTPS -
Off/On Select whether to communicate using HTTPS.
*1, *3
Value: Off, On
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
LDAP -
Off/On Select whether to use LDAP.
Value: Off, On
ThinPrint -
Off/On Select whether to use ThinPrint.
*1, *3
Value: Off, On
Port Number Specifies the port number used. The default port number is 4000.
*1
Value: 1 to 32767
NOTE
This function is displayed when [Off/On] is set to [On].
ThinPrintOverSSL To use the Thin Print over SSL protocol, set [Thin Print Over SSL] to [On].
*1, *2
Value: Off, On
NOTE
• This function is displayed when [Off/On] is set to [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disa
ble, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
WSD-PRINT -
Off/On Set whether to use our proprietary web services. WIA driver, TWAIN driver and Network FAX
driver use this Enhanced WSD web service.
*1
Value: Off, On
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disa
ble, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
Item Description