Kyocera FS-1010 User Manual

RS-232C Cable Connection
B-14
In DOS, enter the following commands:
C:\>MODE COM1:96,N,8,1,P
C:\>MODE LPT1:=COM1
To test the interface, enter the following:
CTRL P
C:\>DIR
CTRL P
The software settings made using the above procedures are temporary. On
most computers, permanent settings must be made with DIP switches.

Kyocera FS-1010 Specifications

General

Brand	Kyocera
Model	FS-1010
Category	Printer
Language	English