OPERATION GUIDE xxiii
CAUTION
Do not pull the power cord when removing it from the outlet. If the power
cord is pulled, the wires may become broken and there is a danger of fire
or electrical shock. (Always grasp the power plug when removing the
power cord from the outlet.)
Always remove the power plug from the outlet when moving the
machine. If the power cord is damaged, there is a danger of fire
or electrical shock.
If the machine will not be used for a short period of time
(overnight, etc.), turn the power switch off (O). If it will not be
used for an extended period of time (vacations, etc.), remove the
power plug from the outlet for safety purposes during the time the
machine is not in use.
When lifting or moving the printer, pull up the 4 handles on both
sides of the printer, then ALWAYS carry the printer by the
designated 4 handles with at least 4 people, one person to a
handle.
For safety purposes, always remove the power plug from the
outlet when performing cleaning operations.
If dust accumulates within the machine, there is a danger of fire
or other trouble. It is therefore recommended that you consult
with your service representative in regard to cleaning of internal
parts. This is particularly effective if accomplished prior to
seasons of high humidity. Consult with your service
representative in regard to the cost of cleaning the internal parts of the
machine.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
