Kyocera FS-C1020MFP

A-12
ENERGY STAR Program
This machine is equipped with the following Energy Saver modes: Energy Saver
mode 1 and Energy Saver mode 2. The machine recovers from Energy Saver
mode when it receives a print job, prints a received fax, or when the { Copy},
{Color Start}, or {B&W Start} key is pressed.
❖ Energy Saver mode 1
This machine automatically enters Energy Saver mode 1 about 30 seconds af-
ter the last operation is completed.
❖ Energy Saver mode 2
This machine automatically enters Energy Saver mode 2 2 minutes after the
last operation is completed.
❖ Specifications
ENERGY STAR
®
Program Requirements for Imaging Equipment
The ENERGY STAR
®
Program Requirements for Imaging Equipment encourages energy con-
servation by promoting energy efficient computers and other office equipment.
The program backs the development and dissemination of products that feature energy saving
functions.
It is an open program in which manufacturers participate voluntarily.
Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multi-
function devices. Energy Star standards and logos are internationally uniform.
Energy Saver mode 1 Power Consumption 110 W or less
Default Time 30 seconds
Recovery Time 10 seconds or less
Energy Saver mode 2 Power Consumption 25 W or less
Default Time 2 minutes
Recovery Time 48 seconds or less