Kyocera FS-1025MFP - User Manual

Other manuals for Kyocera FS-1025MFP

Quick Installation Guide36 pages

Instructions17 pages

Questions and Answers

J
Jessica WatsonAug 20, 2025
How to fix Kyocera FS-1025MFP All in One Printer that won't print from computer?
- J
  jameshunterAug 20, 2025
  If your Kyocera All in One Printer is not printing from the computer, check the following: * Ensure both ends of the power cord are securely connected. * Verify the machine is powered on. If not, turn it on. * Make sure the correct interface cable is securely connected. * If the machine was powered on before connecting the interface cable, power it off and then on again after connecting the cable. * Confirm that the print job is not paused; if it is, resume printing.
K
Kim CervantesAug 21, 2025
What to do if Kyocera FS-1025MFP All in One Printer prints status page but not computer data?
- P
  Patrick ArnoldAug 22, 2025
  If your Kyocera All in One Printer prints a status page but not data from the computer: * Ensure both ends of the interface cable are securely connected and consider replacing the interface cable. * Try printing another file or using another print command to check program files and application software. If the problem occurs with a specific file or application, check the printer settings for that application.
K
Kenneth JonesAug 25, 2025
How to resolve gray background on Kyocera FS-1025MFP All in One Printer printouts?
- S
  Samantha BassAug 25, 2025
  To address a gray background on printouts from your Kyocera All in One Printer: * Check the toner container and replace it if necessary. * Increase the adjustment value for the Drum charge setting in the Maintenance Menu. * Decrease the adjustment value for the Print density setting in KYOCERA Client Tool.
A
Amy BrownAug 26, 2025
How to fix skewed images on Kyocera FS-1025MFP All in One Printer?
- P
  Peter WilkinsonAug 26, 2025
  To resolve images that are skewed when using your Kyocera All in One Printer: * When placing originals on the platen, align them with the original size indicator plates. * Check the position of the paper width guides to ensure the paper is loaded correctly.
M
Michelle CoxAug 27, 2025
How to fix vertical streaks on Kyocera FS-1025MFP printouts?
- M
  mendezdianeAug 28, 2025
  To address printouts with vertical streaks on your Kyocera All in One Printer, clean the slit glass cover.
M
Michele HernandezAug 29, 2025
How to eliminate moire pattern on Kyocera FS-1025MFP All in One Printer copies?
- C
  Christopher DavilaAug 29, 2025
  To resolve copies with a moire pattern from your Kyocera All in One Printer, set the image quality to Photo if the original is a printed photograph.
D
Deborah ValdezAug 31, 2025
How to improve text clarity on Kyocera FS-1025MFP All in One Printer?
- C
  Cynthia FrazierSep 1, 2025
  If texts are not clearly printed by your Kyocera All in One Printer, select the appropriate image quality for the original.
C
collinsjohnSep 2, 2025
What to do if Kyocera FS-1025MFP All in One Printer printouts are wrinkled?
- C
  Cheryl CruzSep 3, 2025
  To resolve printouts that are wrinkled when using your Kyocera All in One Printer, replace the paper with new paper.
M
Michael DicksonSep 4, 2025
What to do if Kyocera FS-1025MFP doesn't make copies when pressing start?
- B
  Brian HoodSep 5, 2025
  If pressing [Start] on your Kyocera All in One Printer does not produce copies: * Check the message on the machine screen, KYOCERA Client Tool, or the Status Monitor and respond accordingly. * If the machine is in Sleep mode, press any key on the operation panel to recover it.
J
Jeremy WeberSep 6, 2025
How to fix dropouts or stray dots on Kyocera FS-1025MFP printouts?
- M
  marygarciaSep 7, 2025
  To resolve printouts from your Kyocera All in One Printer that have dropouts or stray dots, increase the adjustment value for the Drum charge setting in the Maintenance Menu.

Summary

Preparation

Device Connections

Instructions for connecting the machine via USB, network, or fax cables.

Driver and Utility Installation;Uninstallation

Procedures for installing and removing necessary software for machine operation.

Printing

Printing from Applications

Steps for printing documents created in applications using the machine.

FAX Operations

Fax Machine Initial Setup

Initial setup steps, including setting date and time for fax operations.

Entering Fax Destinations

Procedures for entering fax numbers manually or via the Address Book.

Sending Faxes Guide

Step-by-step guide for transmitting faxes from the machine.

Receiving Faxes Information

Information on automatic and memory reception of incoming faxes.

Fax Function Settings

PC Fax Transmission

Instructions for sending faxes from a computer using the FAX Driver.

Maintenance

Toner Container Replacement Procedure

Step-by-step guide for replacing the toner container when it is depleted.

Troubleshooting

Solving Common Malfunctions

A table listing common symptoms, checkpoints, and corrective actions for problems.

Understanding Error Messages

Explains machine error messages, their meanings, and remedies.

FAX Error Code Reference

A reference for understanding specific error codes related to fax operations.

Clearing Paper Jams Guide

Detailed instructions for removing paper jams from various locations in the machine.

Kyocera FS-1025MFP Specifications

General

DVD/CD printing	No
Duplex printing	Yes
Print technology	Laser
Time to first page (black, normal)	7.5 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	13 s
Scan to	USB
Grayscale levels	256
Maximum scan area	Legal (216 x 356) mm
Scan speed (black)	18 ppm
Scan speed (color)	6 ppm
Image formats supported	BMP, JPG, PNG, TIF
Document formats supported	PDF
Faxing	Mono faxing
Printing colors	Black
Maximum duty cycle	20000 pages per month
Number of print cartridges	1
Paper input type	Cassette
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	251 sheets
Maximum print size	216 x 356 mm
Duplex media weight	60 - 120 g/m²
Paper tray media types	Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Display	LCD
Product color	Black, Grey
Market positioning	Business
Display number of lines	2 lines
Standard interfaces	Ethernet, USB 2.0
Mobile printing technologies	Not supported
Processor family	ARM
Sound power level (standby)	29 dB
Sound pressure level (copying)	50 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (PowerSave)	3 W
Power consumption (average operating)	342 W
Sustainability certificates	ENERGY STAR