Need help?Do you have a question about the Kyocera ECOSYS FS-1020MFP and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Print Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Monthly Duty Cycle | 20, 000 pages |
| Time to First Page | 8.5 seconds |
| Duplex Print Mode | Manual |
| Scan Type | Flatbed |
| Output Capacity | 100 sheets |
| Maximum Paper Size | A4 |
| Functions | Print, Copy, Scan |
| Memory | 32 MB |
| Print Speed | 20 ppm |
| Copy Speed | 20 pages per minute |
| Maximum Scan Area | 8.5 x 14 inches |
| Fax Transmission Speed | Not supported |
Explains symbols used for safety warnings and precautions.
Specifies environmental conditions and space needed for machine installation.
Detailed steps to access and run the machine's service mode.
Covers misfeed indication and detection conditions.
Explains self-diagnostics, codes, and error messages.
Addresses issues affecting print quality and image formation.
Covers troubleshooting for electric, mechanical, and general errors.
Lists essential safety and handling precautions before starting work.
Step-by-step guide for upgrading the machine's firmware via USB.
Notes and procedures required after replacing the main PWB.
Describes the mechanisms for feeding and conveying paper from cassettes and trays.
Explains the components and function of the drum section.
Describes the components and function of the developer section.
Covers the scanner and laser scanner units for imaging and printing.
Explains the transfer roller and separation brush mechanism.
Details the heat roller, press roller, and fusing mechanism.
Describes the paper path for duplex printing and paper ejection.
Explains the operation of the document processor for scanning originals.
Identifies and describes the function of various PWBs in the machine.
To Next Page