Kyocera ECOSYS FS-1020MFP User Manual

2M4/2M5/2M6/2M7
2-4-8
2. Produce the new waste toner box from
the MK kit, remove its sealing cap, and
fit the sealing cap to the old waste toner
box.
Figure 2-4-15
(6) Detaching and refitting the paper feed pulley and lower paper feed guide
Procedure
1. Close the rear cover.
2. Take out the paper-feed replacement
unit from the maintenance kit.
3. Lift the unit and place it on the replace-
ment unit with the front side facing
down.
Figure 2-4-16
4. Raise the lever at the lower paper feed
guide and slide the lower paper feed
guide by holding the rib.
Figure 2-4-17
Paper-feed replacement unit
1
2
Lib
Lever
Lower paper feed guide

Kyocera ECOSYS FS-1020MFP Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	20, 000 pages
Time to First Page	8.5 seconds
Duplex Print Mode	Manual
Scan Type	Flatbed
Output Capacity	100 sheets
Maximum Paper Size	A4
Functions	Print, Copy, Scan
Memory	32 MB
Print Speed	20 ppm
Copy Speed	20 pages per minute
Maximum Scan Area	8.5 x 14 inches
Fax Transmission Speed	Not supported