2M4/2M5/2M6/2M7
2-1-10
2-1-5 Transfer/Separation section
The transfer/separation section consists of the transfer roller, discharger brush. A high voltage generated by
the high voltage PWB(HVPWB) is applied to the transfer roller for transfer charging. Paper after transfer is
separated from the drum.
Figure 2-1-13 Transfer roller section
Figure 2-1-14 Transfer roller section block diagram
1
2
3
1. Transfer roller
2. Discharger brush
3. Rear transfer guide
MPWB
HVPWB
YC13
Transfer bias
Discharger
brush
T
To Next Page
Loading...
