2M4/2M5/2M6/2M7-1
2-4-21
(2) Slit Glass Cover
* : 3 in 1 25/26 ppm model, 4 in 1 20/21, 25/26 ppm model only
1. Open the DP.
Figure 2-4-42
2. Remove the slit glass cover.
3. Using a cleaning cloth, clean the front
and back sides of the slit glass cover to
remove dusts and dirt.
Clean the surface of the slit glass.
* : The slit glass with a soft cloth moist-
ened with alcohol or a diluted neutral
detergent.
* : Make sure the slit glass has dried com-
pletely before replacing it.Do not use
organic solvents or other strong chemi-
cals.
Figure 2-4-43
Slit glass cover
Slit glass
To Next Page
Loading...
