Kyocera ECOSYS FS-1020MFP User Manual

2M4/2M5/2M6/2M7-1
1-4-10
1-4-3 Image formation problems
If the part causing the problem was not supplied, use the unit including the part for replacement.
(1) No image
appears (entirely
white).
(2) No image
appears (entirely
black).
(3) Part of image is
missing.
(4)
Gray background. (5) White streaks
are printed verti-
cally.
See page 1-4-11 See page 1-4-11 See page 1-4-12 See page 1-4-12 See page 1-4-13
(6) Black streaks
are printed verti-
cally.
(7) White or black
streaks are
printed horizon-
tally.
(8) Spots are
printed.
(9) Printing incom-
plete or out of
position
(10)Paper is wrin-
kled.
See page 1-4-13 See page 1-4-13 See page 1-4-14 See page 1-4-14 See page 1-4-14
(11) Offset occurs. (12)Fusing is loose. (13)Faint or blurred
printing.
(14)Dirt on the top edge or back of the
paper.
See page 1-4-15 See page 1-4-15 See page 1-4-15 See page 1-4-16
(15)Image center
does not align
with the original
center.
(16)
Unevenly repeating horizontal streaks in
the printed objects.
Spots in the printed objects.
See page 1-4-16 See page 1-4-16

Kyocera ECOSYS FS-1020MFP Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	20, 000 pages
Time to First Page	8.5 seconds
Duplex Print Mode	Manual
Scan Type	Flatbed
Output Capacity	100 sheets
Maximum Paper Size	A4
Functions	Print, Copy, Scan
Memory	32 MB
Print Speed	20 ppm
Copy Speed	20 pages per minute
Maximum Scan Area	8.5 x 14 inches
Fax Transmission Speed	Not supported