How to troubleshoot 'Cannot send document' on Kyocera FS-C2626MFP?
If you see 'Cannot send document' on your Kyocera All in One Printer, make sure the modular cord is correctly connected. If a 'Send error' is displayed, identify and fix the cause of the error, then try sending again. Also, check if the TX (transmission) restriction is activated, and if so, cancel it.
What does 'Box limit exceeded' mean on Kyocera FS-C2626MFP All in One Printer?
If your Kyocera All in One Printer displays 'Box limit exceeded', it means the Sub Address Box capacity is full. Press [End] to cancel the job, then print or delete data in the Sub Address Box before trying again. Alternatively, the polling box might be full; press [End] to cancel the job, delete documents from the polling box, and then repeat the operation.
What to do if Kyocera FS-C2626MFP All in One Printer shows 'Job Accounting restriction exceeded'?
If your Kyocera All in One Printer displays 'Job Accounting restriction exceeded', it means the number of pages used has surpassed the preset limit. Press [End] to cancel the current job. You will need to reset the limit for paper use before attempting the job again.
What does 'Scheduled sending jobs exceeded' mean on Kyocera All in One Printer?
If your Kyocera All in One Printer displays 'Scheduled sending jobs exceeded', it means the limit for delayed transmission jobs has been reached. Press [End] to cancel the current job. You should wait until the delayed transmission is executed or cancel a delayed transmission before trying the job again.
How to fix Kyocera FS-C2626MFP All in One Printer when it cannot send fax?
If your Kyocera All in One Printer cannot send a fax, first, ensure the modular cord is correctly connected. Verify that the Permitted FAX No. and Permitted ID No. are registered correctly. If a communication error occurred, check the error codes in the TX/RX Result Report and Activity Report and perform the corresponding procedure if the error code starts with 'U' or 'E'. Also, the destination FAX line or machine may be busy, so try sending again. If none of these steps resolve the issue, contact your Service Representative.
What to do if my Kyocera FS-C2626MFP All in One Printer shows a machine failure?
If your Kyocera All in One Printer displays a machine failure message, turn the main power switch off and on, or unplug the power cord and plug it in again. If the message persists, note the error code, turn off the main power switch, unplug the power cord, and call your service representative.
What to do if Kyocera FS-C2626MFP All in One Printer says 'Add the following paper'?
If your Kyocera All in One Printer displays 'Add the following paper in cassette 1 (~4)', it means the indicated cassette is out of paper. Add paper to the cassette. If a specific reception paper type is required, it will be displayed; you can also press [Paper Selection] to use another paper source, or press [Continue] to print using the selected paper. If the type of printing paper is specified but unavailable, select another paper source and press [Continue]. Finally, ensure the cassette is securely loaded by removing and reloading it completely.
Why my Kyocera FS-C2626MFP All in One Printer cannot receive document?
If your Kyocera All in One Printer says 'Cannot receive document', check that the modular cord is correctly connected. If a 'Communication error' is displayed, fix the error and ask the sender to retry. Also, verify that the RX (reception) restriction is not activated; if it is, cancel it.
What to do if Kyocera FS-C2626MFP All in One Printer says 'The phone receiver is off the hook'?
If your Kyocera All in One Printer indicates that 'The phone receiver is off the hook', check if the phone connected to the machine is off the hook and hang up the handset.
Why Kyocera FS-C2626MFP All in One Printer cannot perform broadcast transmission?
If your Kyocera All in One Printer cannot perform broadcast transmission, it may be due to insufficient memory. Try again after the memory has free space, or create free space in the memory.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 9600 x 600 DPI |
| Time to first page (black, normal) | 9 s |
| Time to first page (color, normal) | 10.5 s |
| Print speed (black, normal quality, A4/US Letter) | 26 ppm |
| Digital sender | - |
| Printing colors | Black, Cyan, Magenta, Yellow |
| Maximum duty cycle | 65000 pages per month |
| Number of print cartridges | 4 |
| Page description languages | Microsoft XPS, PCL 5c, PCL 6, PCL XL, PostScript 3 |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 10 s |
| Time to first copy (color, normal) | 12 s |
| Scan to | E-mail, File, FTP, Image, OCR, USB |
| Scan drivers | TWAIN, WIA |
| Scanner type | ADF scanner |
| Grayscale levels | 256 |
| Maximum scan area | Legal (216 x 356) mm |
| Scan speed (black) | 35 inch/min |
| Scan speed (color) | 25 inch/min |
| Image formats supported | JPG, TIF |
| Document formats supported | |
| Fax memory | 256 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MR |
| Fax transmission speed | 3 sec/page |
| Fax speed dialing (max numbers) | 100 |
| Paper input type | Cassette, Paper tray, Sheetfed |
| Total input capacity | 350 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 1350 sheets |
| Total number of input trays | 3 |
| Maximum number of input trays | 7 |
| Multi-Purpose tray input capacity | 50 sheets |
| Custom media width | 70 - 216 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 148 - 356 mm |
| Paper tray media types | Plain paper |
| Paper tray media weight | 60 - 163 g/m² |
| Non-ISO print media sizes | Folio |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Multi-purpose tray media types | Envelopes |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Auto Document Feeder (ADF) media weight | 50 - 120 g/m² |
| Display | LCD |
| Control type | Touch |
| Product color | Black, White |
| Display diagonal | 4.3 \ |
| Market positioning | Business |
| Standard interfaces | Ethernet, USB 2.0 |
| Wi-Fi | No |
| Mobile printing technologies | Not supported |
| Processor model | 464 |
| Processor family | PowerPC |
| Compatible memory cards | CF |
| Maximum internal memory | 2048 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (copying) | 50 dB |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 76 W |
| Power consumption (PowerSave) | 16 W |
| Power consumption (average operating) | 475 W |
| Sustainability certificates | ENERGY STAR |
| Certification | TUV, GS, CE |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| Server operating systems supported | Windows 2000 Advanced Server, Windows 2000 Server, Windows MultiPoint Server 2011, Windows SBS 2011 Essentials, Windows SBS 2011 Standard, Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64, Windows Server 2012 |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 514 mm |
| Height | 603 mm |
Official service manual for Kyocera FS-C2526MFP and FS-C2626MFP copiers.
Details about the manual's publication date and version.
Warning regarding the risk of explosion and proper disposal of batteries.
Records changes made across different revisions of the manual.
Overview of safety warnings and precautions for service personnel.
Explanation of symbols used for warnings, prohibitions, and required actions.
Essential warnings and cautions for safe and correct installation of the machine.
Critical safety warnings and cautions for performing maintenance procedures on the machine.
Guidelines for handling greases, solvents, and warnings about flammable materials.
Details on type, printing method, originals, paper weight, type, size, and speed.
Information on light source, scanning, CPU, memory, resolution, and operating environment.
Details on document processor and printer specs like speed, resolution, and OS support.
Details on scanner resolution, speed, and fax specifications for 4-in-1 models.
Diagram and labels identifying components on the front of the machine.
Diagram and labels identifying components on the rear of the machine.
Diagram and labels identifying components of the document processor.
Diagram and labels identifying the buttons and indicators on the operation panel.
Diagram illustrating the internal arrangement of major components within the machine.
Specifications for temperature, humidity, power supply, and location for machine installation.
Step-by-step guide for unpacking the machine and its accessories.
Instructions for removing protective tapes and pads before initial use.
Procedure for inserting toner containers and installing the waste toner box.
Guide on loading paper, connecting cables, and powering on the machine.
Procedure for installing optional expansion memory modules into the machine.
Procedure for installing an optional memory card into the interface slot.
Step-by-step process for selecting and running specific maintenance functions.
Comprehensive list of available maintenance items with their functions and initial settings.
Details on how to output status reports, event logs, and send data to USB memory.
Example output of event log and detailed causes for paper jam errors.
Procedures for restoring factory defaults and setting the machine serial number.
Initializing machine memory and correcting touch panel positions.
Checking DP operation and setting the type of IC card used by the machine.
Procedure to set, check, and clear the maintenance cycle and count.
Switching between single/double counts and selecting copy counting timing.
Determining service status page display and setting size conversion factors.
Setting maintenance due indication and performing automatic halftone adjustment.
Procedures for automatic adjustment of scanner and DP scanning sections.
Setting scan target values and adjusting scanning position and center line.
Initializing fax data, permanent data, and setting user data 1 and 2.
Configures lines ignored for fax reception and transmission system settings.
Manages communication speed, echo prevention, ECM, DIS signal, and V.34 settings.
Configures trailing edge margin detection, remote switching, and auto redialing.
Outputs fax transmission lists and customizes fax batch transmission and print size priority.
Individually sets software switches on the FAX control PWB for communication performance.
Lists maintenance kits and provides a gauge for repetitive defects.
Information on using FRPO commands to change printer parameters permanently.
Commands for adjusting print start timing, scanner magnification, and center line.
Adjusts DP scanning position, magnification, and timing for originals.
Overall wiring diagram illustrating connections between various PWBs and components.
Visual guide for installing the card reader holder and its components.
Contact details for KYOCERA Document Solutions in North and Latin America.
Contact details for KYOCERA Document Solutions in Europe, Asia, and other regions.
Description of the cassette paper feed mechanism, including rollers and sensors.
Description of the MP tray paper feed mechanism, rollers, sensors, and separation pad.
Description of the path that conveys paper to transfer/separation and registration rollers.
Description of the drum, charger roller unit, and cleaning unit components.
Description of the developing unit, including sleeve roller, magnet roller, and toner sensor.
Description of the LED illumination, CCD sensor, mirrors, and ISU lens for scanning.
Description of the laser beam scanning process using polygon motor and lenses.
Description of the transfer belt, rollers, cleaning units, and ID sensors.
Description of the secondary transfer roller, separation brush, and bias application.
Description of the fuser section, including heat roller, press roller, and thermistor.
Description of the path for ejecting paper to the inner tray or duplex section.
Description of the path for conveying paper during duplex printing.
Description of components for feeding originals onto the table and conveying section.
Description of the path for conveying originals through the DP contact glass.
Description of components for ejecting originals and switchback scanning.
Identification and function of major PWBs like Main, Engine, Power Source, and High Voltage.
Diagram and list of switches and sensors with their functions.
Diagram and list of motors and their roles in driving various machine sections.
Identification and functions of clutches, solenoids, and cleaning lamps.
Identification of DP drive PWB, sensors, motors, solenoids, and clutches.
Diagram showing connector locations on the Power Source PWB.
Details of pins, signals, voltage, and description for YC101, YC102, YC103, YC104, YC105.
Diagram showing component and connector locations on the Engine PWB.
Pin details for connectors YC3, YC4, YC6, YC7, YC8, YC9, YC10, YC11, YC12, YC13, YC14, YC15, YC16, YC17, YC18, YC19, YC20, YC21, YC23, YC24.
Diagram showing component and connector locations on the Main PWB.
Pin details for connectors YC8, YC16, YC32, YC34, YC35, YC36, YC37, YC38, YC39, YC40, YC41, YC42, YC100, YC101, YC107, YC108, YC109.
Diagram showing connector locations on the Drum relay PWBs (YC1-YC9).
Pin details for connectors YC1, YC2, YC3, YC4, YC5, YC6, YC7, YC10, YC13.
Diagram showing connector locations on the DP Drive PWBs (YC1-YC8).
Pin details for connectors YC1, YC2, YC3, YC4, YC5, YC6, YC8.
Lists of maintenance kits, their part numbers, and alternative part numbers.
Diagram showing measurement points for repetitive defects related to rollers and drum.
Information on using FRPO commands to change printer parameters permanently.
Commands for adjusting print start timing, scanner magnification, and center line.
Adjusts DP scanning position, magnification, and timing for originals.
Overall wiring diagram illustrating connections between various PWBs and components.
Visual guide for installing the card reader holder and its components.
To Next Page
