Kyocera HYDRO VIEW - ICE (in Case of Emergency); Synchronize Contacts; Share a Contact

Contacts 37
ICE (In Case of Emergency)
Registering ICE information might help
rescue workers, such as paramedics, police
and hospital personnel identify your primary
contact. You can register up to five contacts.
ICE Contacts
To add an ICE contact:
1. From the Home screen, tap Apps >
Contacts > CONTACTS tab and then
tap ICE- In Case of Emergency.
2. Tap .
Note: You will be prompted to enable
the Location access settings if they are
disabled. Read the onscreen
information and follow the instructions.
3. Tap the entry to register.
To change or remove an ICE contact:
1. From the Home screen, tap Apps >
Contacts > CONTACTS tab and then
tap ICE- In Case of Emergency.
2. Tap and tap the contact to remove.
3. Tap OK.
Personal Information
1. From the Home screen, tap Apps >
Contacts > CONTACTS tab and then
tap ICE- In Case of Emergency.
2. Tap My emergency information > .
3. Enter or edit the necessary information
and tap SAVE.
Access the Registered ICE Information
When the Screen is Locked
1. Tap Emergency Call on the screen.
2. The following options are available:
 Tap My emergency information to
display the registered information.
 Tap next to the ICE contact to
place a call to the contact.
Synchronize Contacts
1. From the Home screen, tap Apps >
Contacts.
2. Tap > Settings > Accounts.
3. Select the account type and tap the
account you want to sync your contacts
with.
4. Tap the ON/OFF switch next to
Contacts to turn contacts sync on or off.
Share a Contact
1. From the Home screen, tap Apps >
Contacts > CONTACTS tab.
2. Tap an entry, and tap > Share.
3. In the Share contact via menu, select a
method.