Kyocera HYDRO VIEW - Data Connection Status and Indicators; Virtual Private Networks (VPN); Prepare Your Phone for VPN Connection; Install Security Certificates

Web and Data 53
Data Connection Status and
Indicators
Your phone displays the current status of
your data connection through indicators at
the top of the screen. The following
symbols are used:
Icon
Description
Your phone is connected
to the high-speed 4G LTE
network.
UMTS, HSDPA, or
HSPA+ (data service)
Your phone is connected
to the EDGE network.
Your phone is connected
to the GPRS network.
Virtual Private Networks
(VPN)
Prepare Your Phone for VPN
Connection
Depending on the type of VPN you are
using at work, you may be required to enter
your login credentials or install security
certificates before you can connect to your
company’s local network. You can get this
information from your network administrator.
Install Security Certificates
1. Download and install the certificates
needed to access your local network
into a microSD card. Your network
administrator can tell you how to do this.
2. Insert the microSD card into your phone.
See “Insert a microSD Card” on page 71.
3. From the Home screen, tap Apps >
Settings > Security > Install from SD
card, and install the necessary security
certificates.
Add a VPN Connection
1. From the Home screen, tap Apps >
Settings > More > VPN.
2. If you are asked to set up a screen lock,
tap OK and set up a required type of
lock.
3. Tap and enter the information for the
VPN you want to add.
 Information may include Name, Type,
Server address, PPP encryption
(MPPE), and advanced options.
 Set up all options according to the
security details you have obtained
from your network administrator
 Tap SAVE.The VPN is then added to
the VPNs section of the VPN settings
screen.
Connect to or Disconnect from
a VPN
Connect to a VPN
1. From the Home screen, tap Apps >
Settings > More > VPN.