What does 'Exceeds pre registered copying quantity' mean on Kyocera Copier?
If your Kyocera Copier displays 'Exceeds pre registered copying quantity', the copy limit set under your department ID-code in copy management mode has been reached. Use the copy management mode to clear the copy count.
What does 'Paper capacity exceeded. Remove paper from Side Paper Deck' mean on Kyocera KM-5530 Copier?
If your Kyocera Copier displays 'Paper capacity exceeded. Remove paper from Side Paper Deck', the number of sheets loaded in the optional Side Feeder is too high. Reduce the paper to acceptable limit.
What to do if Kyocera Copier says 'Close xxx cover'?
If the Kyocera Copier displays 'Close xxx cover', the indicated cover is open. Close all covers securely.
What to do if Kyocera KM-5530 Copier says 'Check the cover'?
If your Kyocera Copier displays 'Check the cover', check for an open cover and close it securely.
What to do if Kyocera Copier says 'Close Document processor'?
If your Kyocera Copier displays 'Close Document processor', close the Document Processor.
General| Printing Technology | Laser |
|---|---|
| Max Copying Resolution | 600 x 600 dpi |
| Scanning | Yes |
| Original Size | A3 |
| First Copy Out Time | 3.9 seconds |
| Duplex Printing | Yes |
| Print Speed | 55 ppm |
| Standard Paper Capacity | 1, 100 sheets |
| Connectivity | Ethernet, USB |
| Weight | 67 kg |
| Zoom Range | 25% - 400% |
| Copy Capacity | 999 copies |
| Paper Size | A3, A4, A5, B4, B5 |
| Functions | Copier, Printer, Scanner |
Details safety labels attached to the copier for hazard warnings.
Guidelines for safely installing the copier in its environment and connecting power.
Important safety cautions and warnings to follow when operating the copier.
Identifies and describes the primary physical components of the copier's main unit.
Details the keys, lamps, and touch panel of the copier's main control interface.
Explains the layout and functions of the touch panel interface for controlling the copier.
Instructions for loading paper into various drawers and trays.
Procedures for setting originals in the Document Processor and on the platen.
Step-by-step guide for adding toner to the copier.
Steps for performing a standard copy job, including warm-up and original placement.
How to adjust copy image size using auto or manual magnification modes.
Procedure for temporarily stopping a copy job to perform another.
How to schedule copy jobs to be performed later.
How the energy-saving preheat mode operates and how to resume copying.
How the auto shut-off function conserves energy by turning the copier off.
How to make 2-sided copies from different types of originals.
Procedures for splitting book pages or 2-sided originals onto separate sheets.
How to create margin spaces on copies for notes or layout.
How to center copy images on paper, especially when sizes differ.
How to add space for notes beside copy images or fit multiple originals on one page.
How to erase blemishes from edges or middle of copies.
How to reduce and combine 2 or 4 originals onto a single copy page.
How to add page numbers to copies in various styles.
How to scan a form and overlay its image onto subsequent copies.
How to create booklet-formatted copies from sheet originals.
How to create booklet-formatted copies from book originals, with covers.
How to sort copy sets automatically even without a finisher.
How the copier automatically rotates images for correct orientation.
How to automatically select paper size or copy all originals onto one size.
How to add front/back covers using specific paper types.
How to manually select original size or register custom sizes.
How to use paper as a backing sheet for OHP transparencies to prevent static.
How to create copies with inverted black and white areas.
How to create mirror image copies of originals.
How to create test copies to verify settings before large print jobs.
How to re-print registered copy jobs for additional copies.
How to scan and copy large volumes of originals in a single batch.
How to reduce toner usage by printing lighter images.
How to specify the original orientation for various modes.
How to register and use frequently used settings as programs.
How to register functions/modes under registration keys for quick access.
How to combine multiple originals with covers and inserts into one job.
Overview of functions for scanning, saving, and managing documents on the copier.
Functions for managing print jobs, status, and history.
How to manage copies by department ID and set limits.
How to set the copier to turn ON/OFF automatically on a weekly schedule.
How to configure machine and copy default settings for optimal use.
How to access and modify default settings for copy operations.
How to set default values for exposure mode, steps, and image quality.
An auxiliary paper feed unit holding up to 4,000 sheets of standard paper.
Sorts multiple copy sets, groups originals, staples, and punches holes.
Used for checking copier use and managing copy counts by department.
Allows the copier to be used as a printer, supporting network access.
Enables the copier to be used as a scanner over a network.
Connects two copy machines to reduce copy time and provide backup.
Guides users through actions based on displayed error messages.
Provides procedures to remove jammed paper from various locations within the copier.
Lists common troubles with checkpoints and procedures for resolution.
Instructions for safely cleaning the copier's exterior and internal components.
Provides detailed technical specifications of the copier and its components.
Shows where and how to install various optional units for the copier.
To Next Page
