Other Features of this Fax
5-42
16
Enter the abbreviated number of an
unregistered speed-dial key (0001 -
1000).
Once a 4-digit number is entered, that
number may be changed using the [+]
and [-] keys.
17
Press the [Close] key.
18
Once you are finished modifying all of the items that you want, press the [OK] key.
The message display will return to the same screen as was displayed in step 3.
If you want to continue modifying other group dial keys, repeat steps 3 through 18. If you are
finished deleting group dial keys, press the Reset key.
Dialing With a Group Dial Key
NOTE: You CANNOT use group dial keys in combination with chain dial keys.
You can use group dial keys not only for standard transmission, but also for such operations as
Broadcast Transmission and Polling Reception.
1
If the operation involves the transmission of
documents, set the documents you want to transmit.
2
If you want to change the transmission conditions, such as the resolution and contrast, press the
[TX setting] key. If you do NOT want to change the current conditions, go directly to step 5.
3
Press the key that corresponds to the desired item and change the information as desired. (To
change each transmission condition, refer to pages 2-5 and 2-6.)
4
Once you are finished changing
transmission conditions, press the [One
touch destinat.] key.
( 4 digits)
Enter using # key.
Abbreviation Back
Register the dial.
Group dial
00 04 .
0004.
Enter Destination.
Dest
Ready for fax transmission.
Basic Application
DuplexAddress
Register
TXbook
Print Report
Memor
To Next Page
Loading...
Need help?
General
